Industrial drainage cannot be treated as ordinary foul drainage without checking what the pipe carries. At factories, warehouses, manufacturing premises and process areas, pipe condition is considered alongside chemical exposure, temperature and any pressure duty.
Drain Relining for Industrial Sites
Industrial drain relining for factories and process sites, with pipe condition and operating duty considered together.
HomeDrain Relining for Industrial SitesDrain Relining for Industrial Sites enquiry
Process duty
Chemical exposure, temperature and pressure conditions affect whether a lining system is suitable.
Flow isolation
Sanitary, washdown and process connections may all need control during preparation and curing.
Repair method
Pipe condition and operating duty are considered together before lining or excavation is selected.
Industrial drainage and process connections
Shared runs may receive sanitary drainage, washdown water and process discharges from different parts of a site. Those connections matter during both liner selection and installation. Liquids, temperatures and operating conditions must be checked before the repair method is confirmed.
Isolation during preparation and curing
Incoming flows need to be controlled while the pipe is cleaned, lined and cured. Residual process liquids may also require specific handling according to their hazards. Return-to-service checks match the intended duty of the repaired pipe rather than relying on a simple gravity flow test.
Discuss industrial drain relining
Complete the form and we will get back to you.
Chemical hazards and site controls
Where hazardous substances are present, relevant COSHH guidance should be considered alongside the drainage repair. Product compatibility and site chemical controls are related issues, but neither should be assumed from a generic statement that a liner is chemically resistant.
Choosing an industrial lining system
The liner, resin and cure method need to suit the pipe geometry and service conditions. Severe deformation, collapse or an unsuitable fall may still require excavation. The completion record distinguishes the relined section from any separate connection work.
Drain Relining for Industrial Sites: common questions
Can industrial drains be relined?
Yes, where the pipe condition and selected system are suitable for the actual service duty.
Do process chemicals affect liner selection?
Yes. The substances, concentration, temperature and exposure conditions need checking against the proposed materials.
Can production continue during the repair?
Only where affected process flows and the work area can be controlled safely during preparation, curing and completion checks.
Is a normal drain liner suitable for pressure pipework?
Not automatically. Pressure duty requires a system and design intended for that service.